Just another day - mystery material

Following up on galvanized stainless steel. I know it is available, but it is not used often, at least in construction. I found an item advertised to be stainless steel and galvanized. It didn't look like anything special enough to require exceptional corrosion resistance, so I asked for more information. This is the discussion:

Me: What type of stainless steel? How thick is the zinc coating?

Vendor: This is Galvanized Stainless steel. There is not a zinc coating.

Me: Galvanizing is the process of applying zinc to a substrate. If it's galvanized it has a zinc coating. How thick is it? If it is stainless steel, what type is it? 304, 316, ???

Vendor: I am sorry, but the specific information is not readily available at this time. I am researching your question and will follow up with an update within one business day. [Kudos to the vendor!]

Vendor: I called and spoke with the manufacturer regarding your questions. I asked them if they could tell me what kind of steel is used in the item, citing the examples you gave such as 304, 316, etc. I also asked if they could disclose how thick the zinc coating is. They informed me that they do not provide information regarding either of those questions. I do apologize for any inconvenience that poses for you.

Just another day... corrosion-resistant fasteners

"1.    Where rough carpentry is exposed to weather, in ground contact, or in area of high relative humidity, provide fasteners with hot-dip zinc coating complying with ASTM A153/A153M of Type 304 stainless steel."

Galvanized stainless steel! I wonder what they want for below-grade fasteners. 
Maybe that "of" near the end of the sentence should have been "or".

Key clauses of the general conditions; more means and methods

In the last post, we looked at the means and methods clause in Article 3 of the A201. At the end, I concluded that the architect's responsibilities in construction documents are to show what the building should look like, identify the materials, and establish the standards for those materials. I also stated that virtually everything else - including supervising, scheduling, coordination, and deciding how materials are to be installed - is the contractor's responsibility.

When I make seemingly heretical statements like that, I often am asked how I came to such a conclusion. Many architects have a hard time believing they no longer control much of what goes on during construction, contractors sometimes don't like having that much responsibility, and subcontractors often tell me they don't like it when designers use reference standards because they expect the architect to tell them how to do their jobs.

As I explained, my conclusion is based on the requirements of the AIA general conditions (and general conditions from other sources, which typically have similar provisions). Not only does the A201 say the contractor is responsible for means and methods, it also says the architect is not responsible for means and methods, in Article 4 (my italics):

Key clauses of the general conditions; means and methods

In the last post, we looked at the complementary clause, and saw how powerful it can be; we also looked at the limits of that power. Many architects know of that clause, and I occasionally have heard it cited, something like this: "I don't care if there is no specification for it; it's on the drawings, and you have to provide it!" In the same conversation, it wouldn't be unusual to hear, "No, I don't know how you're going to do it - that's means and methods!"

Although architects aren't shy about citing "means and methods" it seems many of them don't understand the full impact of what they're referring to. Turning again to the AIA A201, here's what Article 3 says (my italics).

§ 3.3 SUPERVISION AND CONSTRUCTION PROCEDURES

§ 3.3.1 The Contractor shall supervise and direct the Work, using the Contractor’s best skill and attention. The Contractor shall be solely responsible for, and have control over, construction means, methods, techniques, sequences and procedures and for coordinating all portions of the Work under the Contract, unless the Contract Documents give other specific instructions concerning these matters.

Key clauses of the general conditions; complementarity

Although it didn't seem like it at the time, one of the best parts of my CSI chapter's certification classes was reading the A201 - not selectively, but the whole thing, beginning to end. Being the heart of the construction contract, anyone who works on a project should know what's in it. I can't quote every part of it, but it's familiar enough that I can find what I'm looking for fairly quickly. I don't deal with much of it, e.g., claims and time requirements, but there are a few parts that I find of particular interest.

We'll start with what I call the complementary clause. 

§ 1.2 CORRELATION AND INTENT OF THE CONTRACT  DOCUMENTS

§ 1.2.1 The intent of the Contract Documents is to include all items necessary for the proper execution and completion of the Work by the Contractor. The Contract Documents are complementary, and what is required by one shall be as binding as if required by all; performance by the Contractor shall be required only to the extent consistent with the Contract Documents and reasonably inferable from them as being necessary to produce the indicated results.

Just another day... sheep's ladder

Just another day... ceiling grid

Grid to be Aluminum non magnetic and non ferrous.